The RequirementsTo meet the basic qualifications for the Field Service Maintenance Mechanic / Electrician opportunity, you will have:
- Legal authorization to work permanently in the U.S. for any employer without requiring visa transfer or visa sponsorship.
- A high school diploma or GED.
- An acceptable or insurable driving record.
- 3-5+ years of related experience, or an equivalent combination of education and experience.
- Foundational electrical/mechanical knowledge, well-developed electrical and mechanical abilities, and a strong understanding of how things work and operate together in a process flow environment.
- PLC experience required with demonstrated ability in ladder logic, component replacement and diagnosis highly preferred.
- Demonstrated ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic and ability to read and understand electrical and mechanical drawings.
- The skill to monitor, check and correct electrical and mechanical issues such as, but not limited to: phase imbalances, current draw, low voltage power supplies, pressure transmitters, relay logic programmable logic control operation, mechanical failures of pumps, valves, piping, actuators, motors, contactors, etc.
- A commitment to working safely with high-pressure gases and electrical components.
- Modern automotive or diesel repair experience with expertise in mechanical and on board electrical diagnostic systems is a plus.
- The practiced skill of diagnosing and repairing mechanical problems on high-pressure gas/air systems is a plus.
- Excellent interpersonal and customer service skills.
- Ability to effectively interact with clients, including translating technical information for non-technical audiences.
- Ability to read blueprints and electrical relay schematics.
- Basic math skills.
- Analytical reasoning and problem-solving ability.
- Your own tools -- a well-developed professional technician style set 1 ½" and less equipped to work on a combination of mechanical and electrical equipment (e.g. wrenches/sockets/Allen wrenches/pliers/pipe wrench/large adjustable wrenches, electrical test meter, electrical screwdrivers, torque wrenches, etc.)
- Basic computer knowledge including Microsoft Office applications and service software.
- Ability to participate in a rotating on-call schedule (every third week). You must be able to hit response times (specified by contract) 100% of the time. You may be required to work limited overtime.
- A home neighborhood/environment safe and secure enough to park a fully stocked company truck.
You will work a standard 7 a.m. to 3:30 p.m. shift. You will also be responsible for 24/7 shift coverage that is on a rotating schedule.
The RoleOpportunity Overview
Reporting to the Field Supervisor, as a Field Service Maintenance Mechanic II you will inspect, maintain and repair the fueling equipment and ensure an aesthetically pleasing appearance for 4 assigned CNG and LNG stations in Ohio. You will be responsible for a mix of client owned (waste management) and Clean Energy owned stations in Columbus, Fairborn, London and Vandalia. Most stations have twin compressions and you will manage their maintenance independently. One fueling station, however, is a unique hybrid station (LNG & CNG) and you will have shared responsibility with one other mechanic. On a daily basis, you will travel from site to site doing equipment and control maintenance and creating positive customer relations that promote Clean Energy.
Each day you will travel to station sites, checking in/out upon arrival and departure, and proactively communicating and building relationships with site personnel. You will take ownership of your stations and their overall care. At each station, you will perform a range of duties from painting and/or cleaning to ensuring safety interlocks for shut-down systems are working properly to automatically rebuilding compressors after 5000 hours of use. The lion's share of your duties will be control and electrical maintenance, but you will also use your mechanical talents daily. Some visits will be short, while others, rebuilding a compressor, for example, will take longer, so you may be at one site all day, or visit multiple sites.
In addition to your individual duties, you might be called to help another Service Technician / Field Maintenance Mechanic or find that you cover a greater distance when on call.
Specifically, you will:
- Make periodic inspections of fueling locations and equipment to determine that proper and normal operating conditions are being met.
- Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
- Install, remove and modify fueling locations and equipment.
- Maintain all fueling related equipment and structures in accordance with manufacturers and Clean Energy guidelines.
- Clean and maintain fueling locations by picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing fueling equipment, and painting and maintaining the canopy, lot, islands, and surrounding landscaping in and outside of enclosures.
- Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
- Inspect, maintain, adjust, repair or replace electrical equipment including electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters and controls for safe and proper operating condition.
- Inspect, maintain, adjust, repair or replace mechanical equipment such as compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
More Good ReasonsGreen Standard for Sustainability
You probably already knew that natural gas burns much more cleanly than gasoline and diesel, producing significantly lower greenhouse gas emissions. But did you also know that natural gas is increasingly renewable, using biomethane reclaimed from landfill via waste-to-energy solutions? Clean Energy is helping companies and public organizations meet aggressive environmental goals.
Proven Strong Leadership
You will join a team of accomplished, seasoned professionals at Clean Energy, led by Andrew Littlefair. Mr. Littlefair served as President of Pickens Fuel Corp (PFC), predecessor company of Clean Energy, which he co-founded in 1997 with Boone Pickens and was Staff Assistant to then President Ronald Reagan in the Office of Presidential Advance from 1983 to 1987.
Clean Energy has the right solutions at the right time, as more and more organizations are exploring alternative fuel vehicles and solutions. For instance, in October 2016 we opened a new state-of-the-art CNG station, in partnership with FedEx, in Oklahoma City. The station that will allow over 100 FedEx Freight Class 8 trucks (big-rigs) to use the convenience of fast-fueling as well as money-saving time-fueling.
In addition to a competitive wage, we offer a comprehensive benefits package that includes medical, dental and other insurances, a 401(k) plan with discretionary company match, paid time off and more. You may also receive a company truck, which you'll fuel at the stations, a cell phone and uniform.
Keys to SuccessTo qualify and find success in this role, you'll need to be a total package person -- have the technical prowess, a commitment to safety, strong analytical skills, and customer service savvy. As a Service Technician, you should be capable of troubleshooting, analyzing, and correcting -- handling everything for your sites. With your strong background (the job is approximately 70% mechanical and 30% electrical) you'll find your way, but will first need to learn the terminology, understand and respect the higher pressure, always follow safety protocols, and learn CNG and LNG sites. We'll give you the tools you need to succeed through a varied training program, but you should come in, hit the ground running and get right down to the business of learning and performing.
To be the total package person we seek, you should also have these key competencies:
Strong sense of urgency -- a customer centric attitude and sense of urgency in protecting the client's and Clean Energy's interests. Compressors are on an auto-call system and if there's a problem, response must be immediate.
A "do what it takes" attitude -- you should be hard-working, dedicated, and present Clean Energy in the best light possible. Attitude is always important.
About UsTaking the Lead in Clean-air Transportation
Clean Energy has a broad customer base in the solid waste, transit, ports, shuttle, taxi, trucking, airport and municipal fleet markets. We have the most experience in inventing and manufacturing today's natural gas technologies. We develop, manufacture, supply, install and service the equipment at natural gas stations across North America.
Clean Energy owns and operates LNG plants and renewable processing facilities, producing CNG, LNG and Redeem (RNG) fuels for our own stations and our clients' stations. Our network of over 550 LNG and CNG fueling stations ensures fleets are powered for both short routes across town and long hauls across North America. Our stations are fueling service vehicles at 37+ major airports, and our strategically located truck-friendly CNG and LNG fueling stations, the network we call America's Natural Gas Highway™, are designed to keep heavy duty fleets fueled up and on the road.
The Clean Energy vision extends beyond servicing the high fuel-use requirements of fleet operators. We are committed to helping businesses access the measurable advantages of clean-fuel solutions. Simultaneously, we are committed to protecting our environment as the leader in clean-air transportation. Clean Energy has proven that business and environmental goals can indeed find common ground, with mutually profitable results. Our vision and efforts have received recognition and awards from business and environmental organizations alike.