Please note that this position is
no longer available.
If you would like to be considered for similar opportunities now or in the future, feel free to apply and/or set up a notifier for yourself.
Operator Technician
TN - Millington CERF PlantMillington
Summary
Maintain, inspect, and repair plant equipment and assure and maintain esthetically pleasing appearance of the facility by performing the following duties.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Make periodic inspections of Plant equipment to determine proper and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
Review daily operating reports and other records to ensure specified operating characteristics in control of the Plant equipment.
Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment.
Diagnose equipment malfunctions during emergencies and direct activities to restore normal operation or to shut down malfunctioning unit.
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters and voltmeters.
Troubleshoot and repair electrical system wiring from control wiring up to 480 volts.
Install, remove and modify equipment.
Notify Plant Manager of shutdown or major changes in power output of unit.
Maintain all Plant equipment and structures in accordance with manufactures and Clean Energy guide lines.
Cooperate in routine and special tests and plant inspections to improve operations and maintain safe working conditions.
Maintain a clean work space including the plant building, control room, rest room, break room and grounds.
Electrical
Inspect, maintain and adjust electrical equipment such as but not limited to electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals with assistance of direct supervisor.
Mechanical
Inspect, maintain and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals with assistance of direct supervisor.
Other duties as assigned.
Supervisory Responsibilities
This position has no supervisory responsibilities.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
High School Diploma or equivalent, 5+ years of related experience and/or training; or equivalent combination of education and experience.
Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Computer Skills
Proficiency in HMI (Human Machine Interface) applications and basic knowledge of Microsoft Office applications.
Certificates, Licenses, Registrations
None required.
Summary
Maintain, inspect, and repair plant equipment and assure and maintain esthetically pleasing appearance of the facility by performing the following duties.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
Make periodic inspections of Plant equipment to determine proper and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
Review daily operating reports and other records to ensure specified operating characteristics in control of the Plant equipment.
Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment.
Diagnose equipment malfunctions during emergencies and direct activities to restore normal operation or to shut down malfunctioning unit.
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters and voltmeters.
Troubleshoot and repair electrical system wiring from control wiring up to 480 volts.
Install, remove and modify equipment.
Notify Plant Manager of shutdown or major changes in power output of unit.
Maintain all Plant equipment and structures in accordance with manufactures and Clean Energy guide lines.
Cooperate in routine and special tests and plant inspections to improve operations and maintain safe working conditions.
Maintain a clean work space including the plant building, control room, rest room, break room and grounds.
Electrical
Inspect, maintain and adjust electrical equipment such as but not limited to electrical wiring, conduit, panels, switch gear, switches, gauges, transducers, solenoids, gas dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals with assistance of direct supervisor.
Mechanical
Inspect, maintain and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals with assistance of direct supervisor.
Other duties as assigned.
Supervisory Responsibilities
This position has no supervisory responsibilities.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
High School Diploma or equivalent, 5+ years of related experience and/or training; or equivalent combination of education and experience.
Language Skills
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Computer Skills
Proficiency in HMI (Human Machine Interface) applications and basic knowledge of Microsoft Office applications.
Certificates, Licenses, Registrations
None required.
Clean Energy is an equal opportunity employer.
EOE/AA/M/F/Protected Veterans/Individuals with Disabilities
We participate in E-Verify and respect all laws regarding your Legal Right to Work in the U.S.
If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability.
