SUMMARY
ASME Welder 3 position is proficient in welding and capable of performing all welding assignments in the shop. This position welding proficiency exceeds productivity standards and experience very few quality related issues. This position is now capable of working in all manufacturing areas are qualified to assist in the development of new welders.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
- Read and understand plans and specifications, including isometric and orthographic drawings. Visualize two dimensional drawings in three dimensions.
- Plan, lay-out, weld, install test and repair all types of pipe and similar tubular products in accordance with all applicable plans, specifications, codes, and industry standards.
- Produce quality work, meeting requirements of plans, specifications and industry standards.
- Follow established job-site safety and regulations and maintain a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
- Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code.
- Install all other items in accordance with the applicable plans and specifications
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
- Education: High School Diploma (or GED or High School Equivalence Certificate)Preferred
- Experience 1–3 years' welding experience preferred.
- Must pass 6G weld test consisting of one coupon: 2-inch Schedule 40 stainless, TIG with argon purge, Visual & X-ray inspection.
Language Skills
Communication Skills – Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. Also, to be able to ask questions to insure you understand the information given
Mathematical Skills
Will require moderate math skills required to calculate lengths and dimensions.
Reasoning Ability
The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given
Computer Skills
Basic interaction will be required to clock on and off work assignments.
Physical Demands
- Ability to perform repetitive movements
- Ability to work overhead
- Ability to use hands to grasp
- Ability to reach with arms
- Ability to stand, walk, stoop, kneel, squat, crawl, and twist
- Ability to sit, climb and balance.
- Ability to work up to 12 hour shift in all weather and temperature extremes.
- Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
- Vision adequate to perform all required tasks.
- Ability to move in and around confined and cluttered places and uneven areas.
- Ability to work over 5 feet above the ground; must not have fear of heights.
Work Environment
- Employee will be required to wear personal protective equipment as needed to perform job tasks.
- Employee is regularly exposed to noise, dust, varying types of smells
- Employee is frequently exposed to moving mechanical parts, fumes or airborne particles, must be able to properly use and handle toxic or caustic chemicals.
- Employee is regularly exposed to wet and/or humid conditions, elevated work areas, and outside weather conditions.
- Employee is expected to work in a safe and efficient manner while maintaining a clean work area.SUMMARY
ASME Welder 3 position is proficient in welding and capable of performing all welding assignments in the shop. This position welding proficiency exceeds productivity standards and experience very few quality related issues. This position is now capable of working in all manufacturing areas are qualified to assist in the development of new welders.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
- Read and understand plans and specifications, including isometric and orthographic drawings. Visualize two dimensional drawings in three dimensions.
- Plan, lay-out, weld, install test and repair all types of pipe and similar tubular products in accordance with all applicable plans, specifications, codes, and industry standards.
- Produce quality work, meeting requirements of plans, specifications and industry standards.
- Follow established job-site safety and regulations and maintain a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
- Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code.
- Install all other items in accordance with the applicable plans and specifications
-
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
- Education: High School Diploma (or GED or High School Equivalence Certificate)Preferred
- Experience 1–3 years' welding experience preferred.
- Must pass 6G weld test consisting of one coupon: 2-inch Schedule 40 stainless, TIG with argon purge, Visual & X-ray inspection.
-
Language Skills
Communication Skills – Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. Also, to be able to ask questions to insure you understand the information given
Mathematical Skills
Will require moderate math skills required to calculate lengths and dimensions.
Reasoning Ability
The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given
Computer Skills
Basic interaction will be required to clock on and off work assignments.
Physical Demands
- Ability to perform repetitive movements
- Ability to work overhead
- Ability to use hands to grasp
- Ability to reach with arms
- Ability to stand, walk, stoop, kneel, squat, crawl, and twist
- Ability to sit, climb and balance.
- Ability to work up to 12 hour shift in all weather and temperature extremes.
- Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
- Vision adequate to perform all required tasks.
- Ability to move in and around confined and cluttered places and uneven areas.
- Ability to work over 5 feet above the ground; must not have fear of heights.
-
Work Environment
- Employee will be required to wear personal protective equipment as needed to perform job tasks.
- Employee is regularly exposed to noise, dust, varying types of smells
- Employee is frequently exposed to moving mechanical parts, fumes or airborne particles, must be able to properly use and handle toxic or caustic chemicals.
- Employee is regularly exposed to wet and/or humid conditions, elevated work areas, and outside weather conditions.
- Employee is expected to work in a safe and efficient manner while maintaining a clean work area.
SUMMARY
ASME Welder 3 position is proficient in welding and capable of performing all welding assignments in the shop. This position welding proficiency exceeds productivity standards and experience very few quality related issues. This position is now capable of working in all manufacturing areas are qualified to assist in the development of new welders.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
- Read and understand plans and specifications, including isometric and orthographic drawings. Visualize two dimensional drawings in three dimensions.
- Plan, lay-out, weld, install test and repair all types of pipe and similar tubular products in accordance with all applicable plans, specifications, codes, and industry standards.
- Produce quality work, meeting requirements of plans, specifications and industry standards.
- Follow established job-site safety and regulations and maintain a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
- Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code.
- Install all other items in accordance with the applicable plans and specifications
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
- Education: High School Diploma (or GED or High School Equivalence Certificate)Preferred
- Experience 1–3 years' welding experience preferred.
- Must pass 6G weld test consisting of one coupon: 2-inch Schedule 40 stainless, TIG with argon purge, Visual & X-ray inspection.
Language Skills
Communication Skills – Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. Also, to be able to ask questions to insure you understand the information given
Mathematical Skills
Will require moderate math skills required to calculate lengths and dimensions.
Reasoning Ability
The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given
Computer Skills
Basic interaction will be required to clock on and off work assignments.
Physical Demands
- Ability to perform repetitive movements
- Ability to work overhead
- Ability to use hands to grasp
- Ability to reach with arms
- Ability to stand, walk, stoop, kneel, squat, crawl, and twist
- Ability to sit, climb and balance.
- Ability to work up to 12 hour shift in all weather and temperature extremes.
- Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
- Vision adequate to perform all required tasks.
- Ability to move in and around confined and cluttered places and uneven areas.
- Ability to work over 5 feet above the ground; must not have fear of heights.
Work Environment
- Employee will be required to wear personal protective equipment as needed to perform job tasks.
- Employee is regularly exposed to noise, dust, varying types of smells
- Employee is frequently exposed to moving mechanical parts, fumes or airborne particles, must be able to properly use and handle toxic or caustic chemicals.
- Employee is regularly exposed to wet and/or humid conditions, elevated work areas, and outside weather conditions.
- Employee is expected to work in a safe and efficient manner while maintaining a clean work area.SUMMARY
ASME Welder 3 position is proficient in welding and capable of performing all welding assignments in the shop. This position welding proficiency exceeds productivity standards and experience very few quality related issues. This position is now capable of working in all manufacturing areas are qualified to assist in the development of new welders.
Essential Duties and Responsibilities include the following. Other duties may be assigned.
- Read and understand plans and specifications, including isometric and orthographic drawings. Visualize two dimensional drawings in three dimensions.
- Plan, lay-out, weld, install test and repair all types of pipe and similar tubular products in accordance with all applicable plans, specifications, codes, and industry standards.
- Produce quality work, meeting requirements of plans, specifications and industry standards.
- Follow established job-site safety and regulations and maintain a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
- Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code.
- Install all other items in accordance with the applicable plans and specifications
-
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience
- Education: High School Diploma (or GED or High School Equivalence Certificate)Preferred
- Experience 1–3 years' welding experience preferred.
- Must pass 6G weld test consisting of one coupon: 2-inch Schedule 40 stainless, TIG with argon purge, Visual & X-ray inspection.
-
Language Skills
Communication Skills – Comprehend documents such as safety rules, operating maintenance instructions, and procedure manuals. Also, to be able to ask questions to insure you understand the information given
Mathematical Skills
Will require moderate math skills required to calculate lengths and dimensions.
Reasoning Ability
The ability to understand information, ideas, direction and then be able to perform the task or project discussed. Also, to be able to ask questions to insure you understand the information given
Computer Skills
Basic interaction will be required to clock on and off work assignments.
Physical Demands
- Ability to perform repetitive movements
- Ability to work overhead
- Ability to use hands to grasp
- Ability to reach with arms
- Ability to stand, walk, stoop, kneel, squat, crawl, and twist
- Ability to sit, climb and balance.
- Ability to work up to 12 hour shift in all weather and temperature extremes.
- Ability to frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
- Vision adequate to perform all required tasks.
- Ability to move in and around confined and cluttered places and uneven areas.
- Ability to work over 5 feet above the ground; must not have fear of heights.
-
Work Environment
- Employee will be required to wear personal protective equipment as needed to perform job tasks.
- Employee is regularly exposed to noise, dust, varying types of smells
- Employee is frequently exposed to moving mechanical parts, fumes or airborne particles, must be able to properly use and handle toxic or caustic chemicals.
- Employee is regularly exposed to wet and/or humid conditions, elevated work areas, and outside weather conditions.
- Employee is expected to work in a safe and efficient manner while maintaining a clean work area.
Clean Energy is an equal opportunity employer.
EOE/AA/M/F/Protected Veterans/Individuals with Disabilities
We participate in E-Verify and respect all laws regarding your Legal Right to Work in the U.S.
If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department at stella.oldham@cleanenergyfuels.com.
