Clean Energy Career Opportunities
Please note that this position is no longer available.
If you would like to be considered for similar opportunities now or in the future, feel free to apply and/or set up a notifier for yourself.
Service Technician II
WATacoma
or
Apply with
Summary
Inspect, maintain and complete repairs on CNG and/or LNG fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. During  inspections,  Service  Technician  II  will  identify  and  repair  corrective  action  and/or proactive maintenance service actions required on CNG / LNG equipment. Service Tech II will participate and/or lead in major overhauls, rebuilds and startups. Service Tech II will perform Preventative Maintenance service orders with minimal supervision and escalate to Service Tech II and Master Technician as needed. Service Technician II will ensure that assigned stations are aesthetically pleasing for our customers by cleaning and wiping down equipment, removing visible trash and ensuring trash containers are emptied.
 
Essential Duties and Responsibilities include the following. Other duties may be assigned.
 
Electrical:
Inspect, maintain and adjust electrical equipment such as but not limited to electrical wiring, conduit,  panels,  switch  gear,  switches,  gauges,  transducers,  solenoids,  gas  dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
 
Must have a strong working knowledge and be able to  demonstrate ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic, also should be able to monitor, check and correct phase imbalances, current draw, low voltage power supply’s, pressure transmitters, relay logic and programmable logic control operation.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
Mechanical:
Inspect, maintain and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
 
Must have a strong working knowledge and be able to demonstrate the ability to diagnose and repair such mechanical problems as high and low pressure gas flow restrictions, interstage gas compressor temperatures and pressures, pressure regulator variance and should be have a strong understanding and be able to monitor, interpret, check and correct operational trends in reciprocating and screw type gas compressors.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
 
 
General:
Make periodic inspections of fueling locations and equipment to determine proper and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
 
Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment related to “Compressed Natural Gas” (CNG), “Liquefied Natural Gas” (LNG) and “Hydrogen” fueling equipment.
 
Clean and maintain fueling locations by: picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing of fueling equipment, painting, canopy, lots, islands, and surrounding landscaping, in and outside of enclosures.
 
Update and document all activity, service orders, work performed and recommendation in our Field Service Automation (FSA) software. Must be thorough and comfortable working on computer and tablets.
 
Install, remove and modify fueling locations and equipment.
 
Maintain all fueling related equipment and structures in accordance with manufactures and
Clean Energy guide lines.
 
Drive to or between company sites to perform job responsibilities. Other duties as assigned.
Supervisory Responsibilities
This position has no supervisory responsibilities.
 
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability  required.  Reasonable  accommodations  may  be  made  to  enable  individuals  with disabilities to perform the essential functions.
 
Education and/or Experience
High School Diploma or equivalent, 5+ years of related experience and/or training; or equivalent combination of education and experience.
 
•   Must have basic Mechanical or Electrical basic / foundation knowledge
•   Must have basic computer knowledge, especially using service software
 
Language Skills

Ability to read and comprehend simple instructions, short correspondence, and memos.  Ability to write simple correspondence.   Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
 
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
 
Reasoning Ability
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
 
Computer Skills
Basic knowledge of Microsoft Office applications.
 
Certificates, Licenses, Registrations
Valid driver’s license with a clean driving record required.
ummary
Inspect, maintain and complete repairs on CNG and/or LNG fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. During  inspections,  Service  Technician  II  will  identify  and  repair  corrective  action  and/or proactive maintenance service actions required on CNG / LNG equipment. Service Tech II will participate and/or lead in major overhauls, rebuilds and startups. Service Tech II will perform Preventative Maintenance service orders with minimal supervision and escalate to Service Tech II and Master Technician as needed. Service Technician II will ensure that assigned stations are aesthetically pleasing for our customers by cleaning and wiping down equipment, removing visible trash and ensuring trash containers are emptied.
 
Essential Duties and Responsibilities include the following. Other duties may be assigned.
 
Electrical:
Inspect, maintain and adjust electrical equipment such as but not limited to electrical wiring, conduit,  panels,  switch  gear,  switches,  gauges,  transducers,  solenoids,  gas  dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
 
Must have a strong working knowledge and be able to  demonstrate ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic, also should be able to monitor, check and correct phase imbalances, current draw, low voltage power supply’s, pressure transmitters, relay logic and programmable logic control operation.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
Mechanical:
Inspect, maintain and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
 
Must have a strong working knowledge and be able to demonstrate the ability to diagnose and repair such mechanical problems as high and low pressure gas flow restrictions, interstage gas compressor temperatures and pressures, pressure regulator variance and should be have a strong understanding and be able to monitor, interpret, check and correct operational trends in reciprocating and screw type gas compressors.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
 
 
General:
Make periodic inspections of fueling locations and equipment to determine proper and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
 
Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment related to “Compressed Natural Gas” (CNG), “Liquefied Natural Gas” (LNG) and “Hydrogen” fueling equipment.
 
Clean and maintain fueling locations by: picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing of fueling equipment, painting, canopy, lots, islands, and surrounding landscaping, in and outside of enclosures.
 
Update and document all activity, service orders, work performed and recommendation in our Field Service Automation (FSA) software. Must be thorough and comfortable working on computer and tablets.
 
Install, remove and modify fueling locations and equipment.
 
Maintain all fueling related equipment and structures in accordance with manufactures and
Clean Energy guide lines.
 
Drive to or between company sites to perform job responsibilities. Other duties as assigned.
Supervisory Responsibilities
This position has no supervisory responsibilities.
 
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability  required.  Reasonable  accommodations  may  be  made  to  enable  individuals  with disabilities to perform the essential functions.
 
Education and/or Experience
High School Diploma or equivalent, 5+ years of related experience and/or training; or equivalent combination of education and experience.
 
•   Must have basic Mechanical or Electrical basic / foundation knowledge
•   Must have basic computer knowledge, especially using service software
 
Language Skills

Ability to read and comprehend simple instructions, short correspondence, and memos.  Ability to write simple correspondence.   Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
 
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
 
Reasoning Ability
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
 
Computer Skills
Basic knowledge of Microsoft Office applications.
 
Certificates, Licenses, Registrations
Valid driver’s license with a clean driving record required.

Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.    Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear.   The employee is frequently required to walk and sit.  The employee is occasionally required to stand.  The employee must occasionally lift and/or move up to 25 pounds.   Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Always practice good judgment and refer to the safety guidelines.
 
Some travel required.
 
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Always practice good judgment and refer to the safety guidelines.
 
The noise level in the work environment is usually moderate.
 
Summary
Inspect, maintain and complete repairs on CNG and/or LNG fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. During  inspections,  Service  Technician  II  will  identify  and  repair  corrective  action  and/or proactive maintenance service actions required on CNG / LNG equipment. Service Tech II will participate and/or lead in major overhauls, rebuilds and startups. Service Tech II will perform Preventative Maintenance service orders with minimal supervision and escalate to Service Tech II and Master Technician as needed. Service Technician II will ensure that assigned stations are aesthetically pleasing for our customers by cleaning and wiping down equipment, removing visible trash and ensuring trash containers are emptied.
 
Essential Duties and Responsibilities include the following. Other duties may be assigned.
 
Electrical:
Inspect, maintain and adjust electrical equipment such as but not limited to electrical wiring, conduit,  panels,  switch  gear,  switches,  gauges,  transducers,  solenoids,  gas  dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
 
Must have a strong working knowledge and be able to  demonstrate ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic, also should be able to monitor, check and correct phase imbalances, current draw, low voltage power supply’s, pressure transmitters, relay logic and programmable logic control operation.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
Mechanical:
Inspect, maintain and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
 
Must have a strong working knowledge and be able to demonstrate the ability to diagnose and repair such mechanical problems as high and low pressure gas flow restrictions, interstage gas compressor temperatures and pressures, pressure regulator variance and should be have a strong understanding and be able to monitor, interpret, check and correct operational trends in reciprocating and screw type gas compressors.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
 
 
General:
Make periodic inspections of fueling locations and equipment to determine proper and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
 
Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment related to “Compressed Natural Gas” (CNG), “Liquefied Natural Gas” (LNG) and “Hydrogen” fueling equipment.
 
Clean and maintain fueling locations by: picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing of fueling equipment, painting, canopy, lots, islands, and surrounding landscaping, in and outside of enclosures.
 
Update and document all activity, service orders, work performed and recommendation in our Field Service Automation (FSA) software. Must be thorough and comfortable working on computer and tablets.
 
Install, remove and modify fueling locations and equipment.
 
Maintain all fueling related equipment and structures in accordance with manufactures and
Clean Energy guide lines.
 
Drive to or between company sites to perform job responsibilities. Other duties as assigned.
Supervisory Responsibilities
This position has no supervisory responsibilities.
 
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability  required.  Reasonable  accommodations  may  be  made  to  enable  individuals  with disabilities to perform the essential functions.
 
Education and/or Experience
High School Diploma or equivalent, 5+ years of related experience and/or training; or equivalent combination of education and experience.
 
•   Must have basic Mechanical or Electrical basic / foundation knowledge
•   Must have basic computer knowledge, especially using service software
 
Language Skills

Ability to read and comprehend simple instructions, short correspondence, and memos.  Ability to write simple correspondence.   Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
 
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
 
Reasoning Ability
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
 
Computer Skills
Basic knowledge of Microsoft Office applications.
 
Certificates, Licenses, Registrations
Valid driver’s license with a clean driving record required.
ummary
Inspect, maintain and complete repairs on CNG and/or LNG fueling equipment, including compressors, dispensers, priority panels, dryers, storage tanks and other related equipment. During  inspections,  Service  Technician  II  will  identify  and  repair  corrective  action  and/or proactive maintenance service actions required on CNG / LNG equipment. Service Tech II will participate and/or lead in major overhauls, rebuilds and startups. Service Tech II will perform Preventative Maintenance service orders with minimal supervision and escalate to Service Tech II and Master Technician as needed. Service Technician II will ensure that assigned stations are aesthetically pleasing for our customers by cleaning and wiping down equipment, removing visible trash and ensuring trash containers are emptied.
 
Essential Duties and Responsibilities include the following. Other duties may be assigned.
 
Electrical:
Inspect, maintain and adjust electrical equipment such as but not limited to electrical wiring, conduit,  panels,  switch  gear,  switches,  gauges,  transducers,  solenoids,  gas  dryers, actuators, motors, meters, frequency drives and controls for safe and proper operating condition.
 
Must have a strong working knowledge and be able to  demonstrate ability to diagnose and repair electrical problems such as current overloads, ground faults, open circuits and faulty relay logic, also should be able to monitor, check and correct phase imbalances, current draw, low voltage power supply’s, pressure transmitters, relay logic and programmable logic control operation.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
Mechanical:
Inspect, maintain and adjust mechanical equipment such as but not limited to, compressors pumps, engines, intercoolers, after coolers, heat exchangers, piping, tubing, fittings, filters, traps, gas dryers, fasteners, valves and actuators for safe and proper operating condition.
 
Must have a strong working knowledge and be able to demonstrate the ability to diagnose and repair such mechanical problems as high and low pressure gas flow restrictions, interstage gas compressor temperatures and pressures, pressure regulator variance and should be have a strong understanding and be able to monitor, interpret, check and correct operational trends in reciprocating and screw type gas compressors.
 
Repair, replace, and adjust malfunctioning equipment to restore proper operating condition specified in regulations and repair manuals.
 
 
 
General:
Make periodic inspections of fueling locations and equipment to determine proper and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed.
 
Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment related to “Compressed Natural Gas” (CNG), “Liquefied Natural Gas” (LNG) and “Hydrogen” fueling equipment.
 
Clean and maintain fueling locations by: picking up trash, emptying trash cans and dumpsters, hand cleaning and polishing of fueling equipment, painting, canopy, lots, islands, and surrounding landscaping, in and outside of enclosures.
 
Update and document all activity, service orders, work performed and recommendation in our Field Service Automation (FSA) software. Must be thorough and comfortable working on computer and tablets.
 
Install, remove and modify fueling locations and equipment.
 
Maintain all fueling related equipment and structures in accordance with manufactures and
Clean Energy guide lines.
 
Drive to or between company sites to perform job responsibilities. Other duties as assigned.
Supervisory Responsibilities
This position has no supervisory responsibilities.
 
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability  required.  Reasonable  accommodations  may  be  made  to  enable  individuals  with disabilities to perform the essential functions.
 
Education and/or Experience
High School Diploma or equivalent, 5+ years of related experience and/or training; or equivalent combination of education and experience.
 
•   Must have basic Mechanical or Electrical basic / foundation knowledge
•   Must have basic computer knowledge, especially using service software
 
Language Skills

Ability to read and comprehend simple instructions, short correspondence, and memos.  Ability to write simple correspondence.   Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
 
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
 
Reasoning Ability
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
 
Computer Skills
Basic knowledge of Microsoft Office applications.
 
Certificates, Licenses, Registrations
Valid driver’s license with a clean driving record required.

Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.    Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and talk or hear.   The employee is frequently required to walk and sit.  The employee is occasionally required to stand.  The employee must occasionally lift and/or move up to 25 pounds.   Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Always practice good judgment and refer to the safety guidelines.
 
Some travel required.
 
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Always practice good judgment and refer to the safety guidelines.
 
The noise level in the work environment is usually moderate.
 
Clean Energy is an equal opportunity employer. EOE/AA/M/F/Protected Veterans/Individuals with Disabilities
We participate in E-Verify and respect all laws regarding your Legal Right to Work in the U.S.


If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department at fawna.kritzer@cleanenergyfuels.com.
or
Apply with